Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] I'm getting an error "there are no ports connected to the circuit ..." in momentum

Status
Not open for further replies.
K

kwagjj

Member level 1
Member level 1
Joined
Apr 13, 2009
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,539
I'm getting an error "there are no ports connected to the circuit ..." in momentum

I have a pcb layout where I want to s-param model a strip which will be my RF out line.

So I imported the top layer of the pcb and configured the settings as the following:

1.JPG
2.JPG
3.JPG
4.JPG

and an error appears like:
5.JPG


can anyone help me get through this error?
 

Re: I'm getting an error "there are no ports connected to the circuit ..." in momentu

Hi
Do you have set the ports in the Layout Layer 05_comp ?
Please double check the ports setting are correct.
if you want to simulate microstip line with lumped element in the moment, the ports are must following setting rule of ADS.

thanks
 
  • Like
Reactions: kwagjj

    K

    kwagjj

    Points: 2
    Helpful Answer Positive Rating
Re: I'm getting an error "there are no ports connected to the circuit ..." in momentu

thanks! I can't believe I have made such a simple mistake!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top