Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Gain settling requirement for the FM system

Status
Not open for further replies.
S

sunnybear

Newbie level 3
Newbie level 3
Joined
Sep 1, 2011
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,314
Hello

I have one question about VGLNA with AGC in FM receiver front-end design. I made one VGLNA with analog AGC for the PhD research work, if possible, could you please let me know what's the gain settling requirement for the FM system and how fast should this AGC loop achieved?

Thank you very much
 

In a FM receiver there should be a limiter. AGC is used rather to reduce limiter overload.
The AGC speed response depend on conditions the receiver is to be used (fixed, mobile), and naturally on the minimum FM modulation frequency. A faster AGC may distort the low-frequency response of the receiver.

If you drive your car in a town, you may hear the effect of multipath too. Mostly in bass response- this shows a poor AGC design, or, do not drive fast in a town!

- - - Updated - - -

I find a curious detail in your "VGLNA" definition. I would not include the LNA in the AGC loop. Rather design a better limiter before FM demodulator.
 
Putting AGC on the RF stage is OK, providing it is delayed, so it only acts when there is an extremely strong signal in an attempt to stop the RF stage cross modulating the strong signal's modulation on to every weak station in the band.
Frank
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top