Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

application of Antenna on these frequencies 10.16GHz 11.33GHz 13.31GHz 15.43Ghz ..

Status
Not open for further replies.
V

vishal_sonam

Full Member level 3
Full Member level 3
Joined
Jan 19, 2012
Messages
187
Helped
14
Reputation
28
Reaction score
14
Trophy points
1,298
Activity points
2,457
Hello
Can anybody tell me about the application antenna on these frequencies.10.16GHz, 11.33GHz, 13.31GHz , 15.43Ghz , 16.40GHz, 18.745GHz, 21.820GHz, 23.23GHz, 27.91GHz, 32.005GHz.

My antenna is producing these resonant frequencies so I need to know about their applications on these frquencies.
thanks
 

Hi vishal_sonam,

Depending on the type of antenna you have designed, if its a high gain antenna, you could use 32GHz for satellite communication purposes. I'm designing an array antenna, targeting at 30GHz frequency range with a minimum gain of 5dB, although its a reflect array( has the highest gain). In addition most of the satellite communication applications take place at the lower frequencies of the millimeter-wave range.

Hope this helps!
 
Antenna application is defined by the system in which it should function. If your antenna "resonates" at so many frequencies, it looks like a poor device useful for nothing.
 

do not forget about polarization, at satellite range linear polarization may be a problem.
at this range microstrip monopole without ground plane is better i think...
and if you obtained this result only by simulation it may be far away from reality, maybe true at one-two frequencies.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top