Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pcb allegro in cadence

Status
Not open for further replies.
P

praveen24

Junior Member level 2
Junior Member level 2
Joined
Jun 30, 2014
Messages
21
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Location
Bangalore
Visit site
Activity points
119
hi,

i have the board file which consist of 4 board in one. but i have problem with while creating layer for a board in different level for example first one-2 layer,second one-6 layer like wise. any possibility in that . please help me.
 

hi,
thanks for your response. My customer needs four board as a stack-up and specific component structure for each.In that first and fourth board does not have more component 2 layer is enough for that routing of that. But second one has FPGA. So it requires minimum 4 layers. If any possibility i sthere for the process to create in single board in using allegro
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top