Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Strange Noise Issue of Passie Swicthed Capcitor Circuit

Status
Not open for further replies.
S

sharezhao

Junior Member level 1
Junior Member level 1
Joined
Jun 12, 2007
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,409
Strange Noise Issue of Passive Swicthed Capcitor Circuit

LBA9U%2$5MH)$463[99LA28.jpg
Very simple circuit. Suppose only the resistor produce thermal noise. Phi1 lasts mTs. Now want to calculate the Continuous time output Noise PSD. My calculation is as:
Devided into two phase, then add together.
First during Phi1
The output is continuous time noise produced by resistor. KTRn, then divided by two capacitor.

During Phi 2, only the sampled noise, all the PSD are folded back to low frequency. The value is only related to the Cap and Clock frequency.

At last, add two together.

But the simulation result is different from my calculation. Large than my calculation. I was wondering where is the problem with my calculation?

Thank you for your time.
 
Last edited:

HI sharezhao,

I believe that you will need to include the kT/C noise of the SC circuit to calculate the proper result.

BR Jerry
 

Hi helpmyjerry, Thanks, Here is my Calculation:
20140703210400.jpg
 

Hi helpmyjerry
Thanks for your reply. The materials you provided is useful. I read them many times before. The problem is solved. The passive case is a little different from active integrator. So if anyone interested, please contact my. LOL
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top