Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How design circuit zero crossing from this picture

Status
Not open for further replies.
J

jengsyber

Newbie level 5
Newbie level 5
Joined
Jan 27, 2009
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,343
help me design circuit zero crossing from picture TA212_1_001i.jpg

i want circuit zero crossing but Rise edge and Fall edge from picture this concept for input interrupt of controller and i delay time with zero crossing of sine wave
 

jengsyber said:
help me design circuit zero crossing from pictureView attachment 106747

i want circuit zero crossing but Rise edge and Fall edge from picture this concept for input interrupt of controller and i delay time with zero crossing of sine wave
Click to expand...
For you analog input you need to take the AC signal from the secondary of a low voltage transformer for safety.

Then amplify the AC so that the rate of change of the voltage at the zero crossing is fast. This will reduce jitter effects.
You will also need to add back to back diodes across the amplifier input to avoid saturation of the amplifier, the output will then be a rectangular waveform as drawn, but the rise and fall times will be related to the input waveform shape, not fast edges.
You can then add a schmitt trigger circuit to share off the waveform which will also match the signal levels required at the uC.
If you do require the time offset on the switching axis shifted from the input zero cross over, then do this in software.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top