Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is the nature of Waveport in HFSS

Status
Not open for further replies.
N

nvt088

Member level 4
Member level 4
Joined
Dec 24, 2013
Messages
79
Helped
10
Reputation
20
Reaction score
10
Trophy points
8
Location
Jupiter
Activity points
509
Hi every one.

Eventhough, I am not new to HFSS. But I haven't understand clearly about Waveport or Lumport in HFSS.

What is the nature of Wave port/Lumport? When we excite by Wave port/Lumport, they are Voltage or Current or E-field or H-field?

What kind of Mode does Waveport/Lumport use? TEM, TE or TM when we assign number of modes is 1, 2, 3...

The direction of Waveport/Lumport is the direction of propagation?

Can anyone tell me exactly?

Many thanks
 

I see that nobody has taken a stab at this question yet, probably because there is some confusion about it. My understanding is that a wave port analyzes the cross section you define, calculates the electromagnetic mode, and launches that into your model. The lumped port essentially just applies a voltage/impedance between two conductors.
 
  • Like
Reactions: nvt088

    N

    nvt088

    Points: 2
    Helpful Answer Positive Rating
rrumpf said:
I see that nobody has taken a stab at this question yet, probably because there is some confusion about it. My understanding is that a wave port analyzes the cross section you define, calculates the electromagnetic mode, and launches that into your model. The lumped port essentially just applies a voltage/impedance between two conductors.
Click to expand...

Thank rrumpf for your answer!

How about when we assign number of modes for waveports? Then, what mode they use? Can you talk more clearly?

Lump port applied Voltage/Impedance between conductors, where I can find this argument?

Many thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top