Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

can not show the connection in Altium

Status
Not open for further replies.
A

alibarghi

Member level 2
Member level 2
Joined
Jun 30, 2013
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,559
can not show the connection between pads?
I tried using the option "View/Connection/Show All" But still the problem persists :sad:
Now what do I do?:cry:
1.PNG
2.PNG
 

Verify that you have the "default color for new nets" system color (layer) enabled. Use the "L" keyboard shortcut (or Design > Board Layers & Colors menu) and look in the lower right quadrant under system colors for the "default color for new nets" option and make sure it's checked. That is the likely solution to your problem.
 
Thanks your reply
That worked.:p

Thank you very much
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top