Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Set all bits to 1 in Verilog

Status
Not open for further replies.
N

nervecell_23

Member level 1
Member level 1
Joined
Apr 26, 2013
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,565
For a signal whose word-length is a PARAMETER, how to set all its bits to 1 in Verilog?

Using '1 is not supported in some synthesis tool because it's a systemVerilog feature...

Thanks!
 
Last edited:

nervecell_23 said:
For a signal whose word-length is a GENERIC, how to set all its bits to 1 in Verilog?

Using '1 is not supported in some synthesis tool because it's a systemVerilog feature...

Thanks!
Click to expand...
You mean a parameter (Generic is VHDL).

assign some_signal = {width_paramter{1'b1}};
 
Dave, how about :
assign some_signal = -'b1;

Also, if the signal width is more than 32, will the "~0" assignment still apply? If yes, how does verilog actually parse the code and resolve it?

Thanks
Leo
 
layowblue said:
Also, if the signal width is more than 32, will the "~0" assignment still apply? If yes, how does verilog actually parse the code and resolve it?
Click to expand...

I tried it with Vivado's simulator, which is only Verilog 2001 complient and yes it worked with a 128-bit signal. I don't think Verilog cares how may bits you put in a bit vector. In the case of integer Verilog is only defined for 32-bits.
 
  • Like
Reactions: tahirsengine

    T

    tahirsengine

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top