TingYi Yong
Newbie level 1
I have this 3-axis dongle serial accelerometer connected using RS-232 cable. I am putting the baud rate as 9600 and im getting 80 XXXX-YYYY-ZZZZ raw data readout per second. I am trying to justify why does it shows 80 readings in a second, and here is my calculation,
2 Bytes of data x (1 Start bit + 1 Stop bit + 8 bits) = 20 bits
20 bits x 3 axis x 80 readouts = 4800 bits
While im getting 4800 bits instead of 9600 bits, so i am wondering did i miss out anything in justifying the 80 readouts?
Thanks guys
2 Bytes of data x (1 Start bit + 1 Stop bit + 8 bits) = 20 bits
20 bits x 3 axis x 80 readouts = 4800 bits
While im getting 4800 bits instead of 9600 bits, so i am wondering did i miss out anything in justifying the 80 readouts?
Thanks guys