Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] atmega32a schematic in proteus

Status
Not open for further replies.
G

ghoola

Member level 2
Member level 2
Joined
Aug 7, 2013
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Location
india
Activity points
352
hi guys. Is there any lib for atmega32a in proteus?:?::!:
 

Have ATMEGA32 in ISIS!!!

Lib AVR2!!!

It doesn't fit???
 

In Proteus ISIS Schematic search for ATMEGA32, the library is AVR2!!!

See differences :

https://www.edaboard.com/threads/259430/

Atmega32.gif

Apologies, my english is not good!!!
 

Yes!!!
Try using ATMEGA32!!!
In my case, I always use ATMEGA8 instead ATMEGA8A!!!
 
  • Like
Reactions: ghoola

    G

    ghoola

    Points: 2
    Helpful Answer Positive Rating
Yes, for my case!!!
Works fine!!!

My step to make new project in AVR Studio 4:

AVR Studio 4.gif
 
  • Like
Reactions: ghoola

    G

    ghoola

    Points: 2
    Helpful Answer Positive Rating
Ok!!!

An example is my usbasp!!!

The hex is designed for Atmega8 or Atmega88... My pcb I use Atmega8A!!!

USBASP works fine!!!
 
  • Like
Reactions: ghoola

    G

    ghoola

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top