Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Calculating capacitance with on HFSS capacitor model

Status
Not open for further replies.
S

stav.revich

Newbie level 1
Newbie level 1
Joined
Nov 3, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Hello,

I'm having problem with calculating the capacitance of a capacitor that i designed in HFSS (i attached the simulation).
I measured the im{Z21} parameter and calculated the C with : C=-1/(2*pi*f*im{z21}.
When I calculated the approximate C with C=epsilon*d/A i got about 5pF, but with the second formula i get Farads!!

What Should I do?

P.S I'm not sure that the the ports i used are correct.
 

Attachments

  • RF Capacitor.rar
    37.4 KB · Views: 277

Hello,

The way you defined your ports is wrong. A lumped port along with its integration line can be defined between a ground line (Lower metal) and a signal line (upper metal). When you do this properly you will get the value of capacitance in both cases equal to approximately 0.55pF. Attached please find the HFSS file.

Thanks,
Hema Swaroop

View attachment RFCapacitorPortsChanged.zip
 
  • Like
Reactions: zardchim and miky1105

    V

    Points: 2
    Helpful Answer Positive Rating
    M

    miky1105

    Points: 2
    Helpful Answer Positive Rating
    Z

    zardchim

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top