Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Defining complicated wave-ports in FEKO

Status
Not open for further replies.
H

Hadi-Alik

Member level 4
Member level 4
Joined
Jun 3, 2006
Messages
76
Helped
9
Reputation
18
Reaction score
9
Trophy points
1,288
Activity points
1,770
Defining non-rectangular waveports in FEKO

Hi

It seems that FEKO is only able to model wave guide ports which are rectangular.Is there anyway to model other configurations such as a kind of parallel plate modes? My structure is composed of two pair of finite parallel plates which are 90deg rotated.

Regards,
Hadi
 
Last edited:

Waveguide ports can be rectangular or circular or co-axial.

For arbitrary shaped geometry, i.e. parallel plates you should use the FEM with a FEM modal port.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top