Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[HFSS] SMA connector for the Horn antenna

Status
Not open for further replies.
N

ngonguyen93

Newbie level 5
Newbie level 5
Joined
Dec 21, 2013
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
47
Untitled.jpgHi everyone,
I have a problem with my design. I don't know how to insert the SMA connector to the horn antennas.
Could you give me some ideas about that?
+ What solution type should I choose (Driven modal or Terminal) ?
+ The excitation is lumped port or wave port ?
+ My antennas material is FR4, so what is the material of waveguide ?
Thank you so much for all your help.
 

thank you, reidintransit.
Could you give me some ideas about placing SMA connector ?
 

A horn antenna is an extension of a rectangular waveguide. To feed the waveguide from a coaxial line you need a transition. Any good connector can be used, SMAs are good om DC to ~18 GHz.
\Designing a waveguide-to-coaxial transition is a complex task. This is why empirical designs are used, and a careful adjustment is needed. All that explains why good transitions are quite costly. You can try what is shown above but such design only works at one frequency or over a narrow band.
If you find a low-cost transition on e-bay and it works, be happy!
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top