Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me select photo darlington.

Status
Not open for further replies.
jayanth.devarayanadurga

jayanth.devarayanadurga

Banned
Advanced Member level 6
Joined
Dec 4, 2012
Messages
4,280
Helped
822
Reputation
1,654
Reaction score
791
Trophy points
1,393
Location
Bangalore, India
Activity points
0
I need a photo darlington single or array with input current of 1 to 60 mA and o/p side current of 500 to 800 mA. Is there any photo-darlington with this specification?
 

Hello,
Same problem I faced couple of months ago. I solved this by using the following idea.
a85474b41085.gif

Enjoy!!!
 
I know that idea but I need to drive a load which draws 250 mA, so I was thinking it would be better to use photo darlington which can drive 500 mA or 800 mA so that the no. of components can be reduced.
 

You can Google for that specs, I haven't seen an opto darlington array with these specs. Any how I hope following links could help you finding the right one! If you found one paste the link or part number here.

HTML: 
http://www.farnell.com/datasheets/2774.pdf
HTML: 
https://www.sparkfun.com/datasheets/Components/LTV-8x6.pdf
HTML: 
http://www.jameco.com/1/3/opto-darlington
HTML: 
http://www.fairchildsemi.com/collateral/solutionguides/Optocoupler-Solutions-Guide.pdf

Enjoy!!!
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top