Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is ergodic channel

Status
Not open for further replies.

cwjcwjcwj

Full Member level 5
Full Member level 5
Joined
Nov 8, 2004
Messages
273
Helped
17
Reputation
34
Reaction score
12
Trophy points
1,298
Activity points
1,714
ergodic channel

What is ergodic and non ergodic channel in MIMO systems?
 

ergodic capacity definition

Definition of Ergodic: A stochastic process is ergodic if no sample helps meaningfully to predict values that are very far away in time from that sample.

- Ergodic channel

* The channel gain process is ergodic, i.e., the time average is equal to the ensemble average. In other words, the randomness of the channel gain can be averaged out (removed) over time. So long-term constant bit rates can be supported.

- Non-ergodic channel

* The channel gain is a random variable and does not change with time. The channel gain process is stationary but not ergodic, i.e., the time average is not equal to the ensemble average. In other words, the randomness of the channel gain can not be averaged out (removed) over time. So long-term constant bit rates can not be supported
 
definition of ergodic capacity

the time average of the signal is the same as the collective average
 

ergodic channel capacity

ergodic is equal to " quasi-static"?? or they are two differet concepts?
 

what is meant by ergodic channel capacity

Ergosic and quasi-static are different. In the quasi-static case the shannon capacity does not exist. THey have to use the outage capacity instead while in the ergodic channel, the shannon capacity is well define since the shannon capacity is the average concept. Hence, the channel must be varied in some senses. To make thing simple...

Ergodic capacity -> you get a number as a capacity such as 10 bps/Hz
Quasi-static capacity -> you get a cdf/ccdf plot of the capacity and you get only a probability to communicate at a given rate.
 
ergodic channels

boy said:
Ergosic and quasi-static are different. In the quasi-static case the shannon capacity does not exist. THey have to use the outage capacity instead while in the ergodic channel, the shannon capacity is well define since the shannon capacity is the average concept. Hence, the channel must be varied in some senses. To make thing simple...

Ergodic capacity -> you get a number as a capacity such as 10 bps/Hz
Quasi-static capacity -> you get a cdf/ccdf plot of the capacity and you get only a probability to communicate at a given rate.

thanks for your help. can you introduce a good reference to understand these concepts?

thanks again
 

non-ergodic channels

i understand all from this paper :)
 
  • Like
Reactions: Tahid and ahmeddeia

    ahmeddeia

    Points: 2
    Helpful Answer Positive Rating

    Tahid

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
how to plot ergodic capacities

again thanks for your help "boy"

it is a cery good paper about MIMO system's capacity.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top