Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] problem in samsung crt tv

Status
Not open for further replies.
P

pradeep.g.belchada

Full Member level 6
Full Member level 6
Joined
Sep 29, 2006
Messages
341
Helped
85
Reputation
170
Reaction score
85
Trophy points
1,308
Location
MUMBAI INDIA
Activity points
2,671
hello, i have a problem in samsung crt tv

tv starts picture comes for 10 minutes , suudenly tv h synch loss appears, some tee sound ( like buzzer) comes from fbt . tv stops i mean
h-o/p stops. i changed fbt, o/p transistor, damper cap then also the same problem. tv model samsung plano 21 , ic used tda 9381

schematic below
 

Attachments

  • cl21k3wf.pdf
    1.2 MB · Views: 210
Last edited:

i mentioned in the above post that line transformer (fbt) is replaced , yoke also replaced then also tv shuts down , when i remove yoke conector , h- section works
 

i had that prob with plano and sansui sets mostly that fault attacks flat screens,i am not sure which coil is exactly affected but i think is the horizontal ,just change the Scan Coils.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top