Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how can i send sms with gsm?

Status
Not open for further replies.
M

mehranqwerty

Junior Member level 1
Junior Member level 1
Joined
Jun 27, 2013
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
111
hello
i want to start sending sms with simcoms products,,,using sim 900 or sim908
i ask all of users help me...plz help me
what is the firs step?
help me
 

Just go through the AT commands manual. There you can easily find the commands for all the tasks that are done by the GSM modem.

You can connect it to the PC and use Hyperterminal(Win XP)/ Teraterm (Win 7).

The command for sending SMS is AT+CMGS
 
hai,
First of all you have to connect the modem to com port and check it out.
By using hyperterminal send AT to Modem, if u get reply with OK.you can da any thing by using that GSM.(AT will send at least 3 times,reply with OK)
In gsm we are using AT commands.

AT+CMGF //for set text mode
AT+CPMS ="SM","SM" // set memory storage
AT+CMGS="Number" //send msg to the number specified in quotes
>type msg //type msg after the > symbol and hit CTRL+Z to send the msg

after send the mdg you ll get reply OK.
 
but my problem is how to start the madule(sim900)
i dont have the diagram
can u help me?
whats the schematic
tnx for answer
 

how should i design the pcb for this circute?

- - - Updated - - -

i dont have the pcb,can u help me?
 

i want to design a circute:
my idea is when i send sms by a mobile to sim 900 so this module with some avr program can start a motor or turn on/off a light
can any one help me?
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top