Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

define a transistor in cst with s2p file

Status
Not open for further replies.

amntt

Advanced Member level 4
Full Member level 1
Joined
Feb 4, 2013
Messages
119
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,868
any one knows , if i can simulate a transistor in cst design and use its s2p file such as what we do in ads
 

you mean how to load a S2P file in ADS?
 

No problem in CST design studio.
 

i want to use renesus ne 3210s01 in my design (in cst) but i dont know how? i should use its s2p file or it is defined somewhere in cst library?!
 

@ CST library are spice par. Much better and accurate use like box s2p. Otherwise transistor is good and cheap, below 1$. Only for attention, exists not correct s par for these transistor. For example s21 grooving ( excitation in a dut )above 20GHz and so on. It should be monotone and logic curves. We made some device up to 40GHz.
 
Last edited:
  • Like
Reactions: amntt

    amntt

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top