Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Power 5V USB peripheral from 3.7V?

Status
Not open for further replies.
M

mmitchell

Advanced Member level 4
Full Member level 1
Joined
Dec 3, 2011
Messages
107
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,203
Hi,

We would like to design an USB host device, but would like the device to be able to power USB peripherals (up to 500mA current) from battery when not connected to DC power. For this purpose, it seems that a power IC which could buck-up 3.7V battery voltage to 5V is needed.

Could someone recommend such a power IC for this purpose?

Additionally, is any such power IC also have built-in current-limiting ability so that we no longer need extra current-limiting switches?



Matt
 

A lot of vendors have good integrated solutions for such things. Linear tech, Maxim, TI.... This per example will do pretty much all you need it to (I expect you will also need to charge your battery) ;)

These above vendors all have parametric search in case you need another battery chemistry, don't like the BGA package or what have you...
 
I am reviewing these products. Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top