Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help regarding MSP430F5438 experiment board

Status
Not open for further replies.
N

neerajneo

Newbie level 4
Newbie level 4
Joined
Sep 28, 2013
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
48
I am using MSP430F5438 microcontroller and respective experiment board but I am in confusion whether that board is a burner use just to burn the micro-controller-. or a complete set where I can connect my interfaces. plz help me it's urgent
 

Hi,

Not a board I have used, but reading the TI info seems it needs ...

A TI Flash Emulation Tool, like the MSP-FET430UIF, is required to program and debug the MSP430 devices on the experimenter board.
Click to expand...

Also have a look at this and other ytubes which explains other ways to program it

https://www.youtube.com/watch?v=2za6Dce2sew.

Have you got to use the TI system, which seems expensive, other simpler and cheaper systems are around if its just hobby use.
 
Thanks for your reply wp100
and can you tell me any other such device to burn msp430f5438 because its experimenter board is worth Rs 11,000
and I have IAR workbench software to debug my program so if possible send me the link from where I can but that
 

Hello!

It depends on which board you are talking about.
I have for example a MSP-EXP430F5438. This one doesn't have an on-board emulator.

Dora.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top