Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help in hfss ..........

Status
Not open for further replies.
Kindly upload the Picture of your schematic & simulation result. since not everyone has HFSS installed.
Not receiving required S11 would probably because of improper input matching. what about other S parameters (S21 & S22) are they fine??
 
Ow@i$ said:
Kindly upload the Picture of your schematic & simulation result. since not everyone has HFSS installed.
Not receiving required S11 would probably because of improper input matching. what about other S parameters (S21 & S22) are they fine??
Click to expand...

thank you for help me...
i'am new here ... so i need time to learn ^_^
this is picture of my design , the parameter taken from paper


in the paper the s11 vs frequency (figure .4) not like my result, there are more than 30 db different , and i don't know why ?
i try to google and search from more than one month....
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    109.9 KB · Views: 96

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top