Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] need help on atmega8 interfacing to computer.

Status
Not open for further replies.
V

vignesh ssvv

Member level 1
Member level 1
Joined
Feb 4, 2012
Messages
35
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,308
Location
India
Activity points
1,469
hi, I have a atmega8 ic and I have planned to build a serial interfacing circuit for it with max232 ic and rs232 cable. the thing that I want to know is, what is software that I can use to transfer my programme(hex file) from computer to the microcontroller using rs232 and max232 interfacing.
 

If you want to programe (transferring hex file to micro) you need a boot loader to accept the data and write it to the flash of the micro. So you need a programmer to write the bootloader first.

Search the term bootloader in the net
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top