Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

eagle replace object help

Status
Not open for further replies.
thebadtall

thebadtall

Full Member level 6
Full Member level 6
Joined
May 17, 2012
Messages
339
Helped
12
Reputation
24
Reaction score
12
Trophy points
1,308
Location
Hellas
Activity points
3,605
Hello I am newbie in eagle and intentend to make an in/out shift register with 48 inputs and 48 outputs.

srs.jpg

I am so far placing the 595's input registers, while I realised that it has SO16 footprint while I wanted the DIL16 footprint.

Now, I click the replace button on the eagle and i choose the correct item (74LS595N) but this one doesnt have VCC pin (pin 16)
How am I supposed to insert another pin over there ? I can use just a pin header and grab a pin but its not correct.

Probably I am missing something, right ?

Please advice me

Thank you !
 

Standard practice will be just to change the package, But to answer your question, you can open the library from where you picked your part ad select which pins to hide and which to show
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top