Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

baud rate in 8051 & PIC Microcontroller

Status
Not open for further replies.
for PIC
/********************* CONFIGURE Baud Rate Generator Register *********************
* Fosc : 7.37 MHz, * Internal FRC PLL 4x = 7.37 Mhz *
* Fcy = Fosc/4 = 1.8425 Mhz * *
* Desired Baud Rate : 9600 * *
* Formula : * *
* UxBRG = (FCY / (16 * Baud Rate)) – 1 * *
* Desired U1BRG = 11 * *
****************************************************************************************/


for any processor you will find its baud rate calculations in its data sheet !
 


Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top