Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to implement this in matlab?

Status
Not open for further replies.
T

tojeena

Member level 3
Member level 3
Joined
Jan 24, 2013
Messages
55
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,570
n=1011(binary) 11 in decimal and b= 3(decimal) and finally getting answer as 011(binary).the b LSB of n to produce the subexponential code of n.How to implement it in matlab?
n=1011 b=3 z=1|011 ans=011.What will be the program for this in matlab .?
 

tojeena said:
n=1011(binary) 11 in decimal and b= 3(decimal) and finally getting answer as 011(binary).the b LSB of n to produce the subexponential code of n.How to implement it in matlab?
n=1011 b=3 z=1|011 ans=011.What will be the program for this in matlab .?
Click to expand...

Hi tojeena, the solution for your problem is you should convert all the number you want to compute either to binary or to decimal and then add all the number finally convert the answer based on your requirements...

to convert decimal to binary use dec2bin(input) and vice versa...

Hope this may be helpful....
 

Thank you for your reply.Actually the input is wavelet transformed coefficients bit plane coded,into binary.:!:
 

Hi tojeena , you get the output as 011 may i know on what basis you have calculated it or there are any equation

will you elaborate your problem in order to find the solution...
 

[its the coding for subexponential codes
 

Hi tojeena,
I need the logic or computation example or equation behind that subexponential, or else just send me the code that produce the output as 011...
 

Thank you so much.Expecting your reply.
 

tojeena said:
The reference for the algorithm of subexponential encoding and decoding is from the link https://upcommons.upc.edu/pfc/bitstream/2099.1/9926/1/PFC_Marcial_Clotet.pdf page 24(encoding) and 32(decoding).

Thank you..
Click to expand...

Hi tojeena,

I have written a code on the idea of the reference paper, and it is give below,

clear all;
clc;
h1 = input('enter the value of k= ', 's');
h2= input('enter the value of n= ', 's');
k = str2num(h1);
n = str2num(h2);
compute = power(2,k);
display(compute);
g=log2(n);
if (n>compute)
b=floor(g);
u=b-k+1;
end
display(b);
display(u);

I have just initialize the code for you
on this basis of above code you develop further on your own idea...

All the best in advance...

Hope It may helpful to you...
 
Thank you so much..I will check this.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top