Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GPS Tracking with a continuous TX/RX in both parties

Status
Not open for further replies.
P

patrickBugRats

Newbie level 4
Newbie level 4
Joined
Mar 10, 2013
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Cebu, Phillippines
Activity points
1,312
Me and my partner have an project of using GPS Tracking system that will send and receive the location to other GPS Tracker which also send and receive or vice versa.

Is it possible?
 

A GPS receiver will only receive signal. You should use any other medium such as GSM to send the signals thorugh an embedded system.
 

The choice of the GPS tracker will depend on the power requirement, communication interface, accuracy you need. When I made it as a project I used FASTRAX UP501 (okay) and I used SIM300 (GSM modem) without internet support.
You just figure out your requirements and google a bit. You will surely get one suitable for your application.
Or else some one else here might help you out with this.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top