Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] atmega8/88 programmer and software for fuses set?

Status
Not open for further replies.
neazoi

neazoi

Advanced Member level 6
Advanced Member level 6
Joined
Jan 5, 2008
Messages
4,157
Helped
13
Reputation
26
Reaction score
15
Trophy points
1,318
Location
Greece
Activity points
37,179
atmega88 programmer and software for fuses set?

Hello I need to build a simple programmer for the atmega88.
The software to use must have the ability to import the HEX file, but it must also be able to set the fuses manually for the chip.

Could you please help a bit with this?

I am building this project **broken link removed**
 

will ponyprog allow me to set the fuses manually?
 

Yes it will, all AVr programmers are able to set the fuses at least when the ISP mode is not locked (which is the default setting)
 
If the fuses are locked , you could try parallel programming with avrdude
 
  • Like
Reactions: neazoi

    neazoi

    neazoi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top