Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Argon implantation using Silvaco

Status
Not open for further replies.
E

edu11

Newbie level 4
Newbie level 4
Joined
Apr 10, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,331
Hello,

can somebody please tell me how to implant argon using silvaco?

The classic line "implant argon dose=1e16 energy=1 tilt=7 bca fullrot amorph" doesn't seem to work.
 

Argon is not simulated as it does not contribute electrically. You would typically use argon the pre-amorphise the surface being implanted.
So for simulation, skip the argon implant then use the "amorph" statement to tell the simulator the surface being implanted is amorphised and to ignore channeling effects.
 
  • Like
Reactions: edu11

    E

    edu11

    Points: 2
    Helpful Answer Positive Rating
Thank you for replying. Unfortunately, argon is not used here to reduce channeling. Argon is implanted using low energy to create traps for charge storage.
 

Then you would need to try match the trapping parameters to actual experiments. Silvaco (at least the versions I am aware of) cannot do this in the process models (Athena).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top