Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Voltage cutoff circuit

Status
Not open for further replies.
V

vikky

Full Member level 3
Full Member level 3
Joined
Oct 18, 2007
Messages
150
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,298
Activity points
2,664
Hello,

Can anyone suggest a analog circuit for voltage detection of 13V and cutting of the supply if in case voltage exceeds 13V. Actually the supply is going to battery for charging purpose.Need to ensure battery doesnt get more than 13V

Thanks and Regards
 

hi

cant u use some regulator to keep the supply to 13v??
 

vikky said:
Hi vinod,

I meant voltage in the battery shouldnt exceed 13V.
Click to expand...

There are several solutions to the problem:

Use a 5...6 V Zener diode and a relay with 5..6 V coil. Adjust a series resistor in the Zener diode-relay coil circuit so that the relay operates at 13 V and its contact opens the battery circuit.

Use an adjustable comparator to open relay contact to battery at the selected voltage.

One-transistor relay driver can do the above function as well.

You can make precision voltage regulator allowing the 13 V output to the battery.
 
  • Like
Reactions: vikky

    V

    vikky

    Points: 2
    Helpful Answer Positive Rating
jiripolivka said:
There are several solutions to the problem:

Use a 5...6 V Zener diode and a relay with 5..6 V coil. Adjust a series resistor in the Zener diode-relay coil circuit so that the relay operates at 13 V and its contact opens the battery circuit.

Use an adjustable comparator to open relay contact to battery at the selected voltage.

One-transistor relay driver can do the above function as well.

You can make precision voltage regulator allowing the 13 V output to the battery.
Click to expand...

Thanks jiripolivka.Your suggestions are useful.I will try it. Thank you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top