Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST SRR metamaterial terahertz

Status
Not open for further replies.
A

alicewonderland

Newbie level 4
Newbie level 4
Joined
Jan 20, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
srr metamaterial

Hello.

Now, I try to simulate ring resonator metamaterial for THz region using CST.
I got a similar simulation result like reported in PHYSICAL REVIEW B 75, 041102 (2007). But, I wonder my result is correct: mesh size and other conditions.
I attacehd my simualation file and papaer.
Some CST and/or metamaterial guys give me advice/comment for SRR in THz region.
Or, can someone please post the SRR example for cst?
If anyone has had any experience simulating the SRR for THz or optical region with cst

plz. coment.........if you have a model please post..

Thanks...
 

srr simulation cst

try to use periodic walls as example in cst about ring FSS.usinf frequency transient in ur simulation
regards
 
cst & metamaterial

where can I show example ?
I could not find it. and if you do not mind, look at my file.
 

hi i am tring to find f resonance of a simple srr in ghz can i email my cst file for you to see where i am wrong i dont see f resonance
 

If you are concerning about retrieval or homogenize the effective permittivity and permeability, then simulate one cell with top and bottom set as PEC and side wall set as PMC and propagation walls as waveport with PML is the typical way.
 
  • Like
Reactions: amntt

    A

    amntt

    Points: 2
    Helpful Answer Positive Rating
thank you. what is pml?

- - - Updated - - -

do you mean perfect match layer by pml ? in cst do we have pml?
 

cst dont have pml

- - - Updated - - -

how i can attach my cst file here
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top