Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] [Moved] spi,spcr,spdr, at89s8252

Status
Not open for further replies.
D

debabrta kar

Member level 5
Member level 5
Joined
May 20, 2013
Messages
86
Helped
7
Reputation
16
Reaction score
5
Trophy points
1,288
Location
india
Activity points
1,858
hi i working on spi protocol using at89s8252 ...i want to know what is th role of spcr and spdr...i mean what is the function of spi controle register and spi data register and what is their effect during and after spi transmission ...i have read the datasheet of at89s8252 and some pdfs os spi protocol....so plz help me out..thanx in advance
 
Re: spi,spcr,spdr, at89s8252

also give sum idea how to visualise the spdr value in tool...because when i am debugingthe code in keil-2 spdr value is not showing plz help me about this......
 
hi i use only microchip
basically, to use spi you have to configure two register SSPSTAT and SSPCON.SSPCON register is used to set the spi mode if either slave or master, the sampling, the rising or the falling edge clock...etc
The SSPSTAT register is used to check if the data was sent or not.pretty easy in case of pic microntroller.
i did a little project with assembly,you can find it here
https://www.edaboard.com/threads/293925/
 

Re: spi,spcr,spdr, at89s8252

yes sir thank and its good that u r a expert...plz help me how to visualize the spdr register value in tool of keil -2 when m debuging my code....i mean how to visualize the data soterd in spdr register ..
 

Re: spi,spcr,spdr, at89s8252

debabrta kar said:
yes sir thank and its good that u r a expert...plz help me how to visualize the spdr register value in tool of keil -2 when m debuging my code....i mean how to visualize the data soterd in spdr register ..
Click to expand...
i'm very sorry,because i only know Microchip micro-controller, i don't have any clue about Atmega.
 

ok sir thank you......plz any1 who have worked on at89s8252 plz suggest me...............
 

yes sir i know but how to visualize value of SPDR in tool...........
 

i am using keil-2 and in debugging the spdr reg value is not showing...............
 

The SPDR register is a read sensitive type. So you can't see it on Reg window. Instead you can read the Rx data through a local variable by read it...
i.e tmp = SPDR;
 
actually i am using assembly langugage so help me how to read it...
 

I don't know the exact Assembly programming. You could move the SFR--> SPDR to a general purpose register and watch it on your tool. If it's in C program i can help you...
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top