Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to calculate maximum power output of a ferrite core?

Status
Not open for further replies.
S

shatruddha

Full Member level 2
Full Member level 2
Joined
Nov 24, 2009
Messages
141
Helped
19
Reputation
38
Reaction score
19
Trophy points
1,298
Location
india
Activity points
2,177
Hi
I recently received a ferrite core with following specifications :
ETD44 , 3c90 (material)
Now I want to know how much power can I transfer using this core.
On doing a bit of googling I found this https://www.ferroxcube.com/prod/assets/sfappl.pdf which provides a beautiful table to list the power at 100khz. But what if I want to use it at 200khz. HOw do i calculate output power for that cause.
 

Re: How to calculate maximum power output of a ferrite core

Using the Ampere's law, you can get the following equation:

E = Ae² * B² / (2 * AL)

E: energy stored in the magnetic field
Ae: core's effective area
B: maximum flux density allowed by the core material
AL: core parameter, depends on Ae, magnetic circuit lenght and air gap lenght

You see, power (P) is enery by time. More energe and less time will result in a higher power.

P = E / t

The input power at the inductor is the energy stored (E) divided by ton. Ton is the duty cycle (D) divided by the switching frequency (fsw).

P = E / ton = E * fsw / D

This is an aproximate way to determine how much power you can obtain from a certain core. Actually there are losses by eddie currents, joule effect and stray flux.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top