Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SPDT switch required

Status
Not open for further replies.
shashy.br

shashy.br

Full Member level 2
Full Member level 2
Joined
Sep 15, 2011
Messages
130
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Location
India
Activity points
2,151
Hi all,

I need an SPDT or a SPST switch (Absorptive) which has the following requirements.

Freq : 9 GHz to 10 GHz

insertion Loss : < 1 dB

Switching speed : 100ns (Maximum)

Power handling : 5 Watt CW.

Connectorized : SMA both sides

I am searching for the part for a long time ,Please help me out if anyone knows the part is available or not !!

or please suggest some vendors for the same.
 

For this power and switching speed you'll need a pin diode switch. I would contact the two companies below, neither one has a standard product that meets all your specs, but they both do high power pin diode switches and they both do lots of custom orders.

**broken link removed**
https://www.pmi-rf.com/Products/Switches/standardmodels.htm
 
for Low cost, you can always design the SPDT before mixer, to lower freq requirements or lower power requirements, then you don't need to special order.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top