Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] SG3524 minimum frequency

Status
Not open for further replies.
manishanand14

manishanand14

Full Member level 4
Full Member level 4
Joined
Sep 3, 2011
Messages
203
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,308
Location
Bangalore ,India
Activity points
2,572
Hello Everyone!

What is the minimum frequency possible in SG3524 IC.

Is is possible to make 50/60 Hz low power inverter using any easily available IC.[without programming]
 

I dont know exactly what is the min freq of SG3524. but less than 1Hz also it'll support. for ur req SG3524 (SG1524 or SG2524) is one of the best solution. ref circuit: http://www.circuitstoday.com/pwm-inverter-circuit.
http://www.datasheetcatalog.org/datasheets/90/271356_DS.pdf - pg no. 5

In other hand u can use 4017 with 555.

here few more solution for ur req:
http://www.ti.com/lit/ds/symlink/ucc38083.pdf
http://www.ti.com/lit/ds/symlink/lm5033.pdf
http://www.onsemi.com/PowerSolutions/product.do?id=TL594 -> http://www.onsemi.com/pub_link/Collateral/TL594-D.PDF
**broken link removed** -> **broken link removed**
**broken link removed**

http://cds.linear.com/docs/en/datasheet/37211fs.pdf
**broken link removed**
http://datasheets.maximintegrated.com/en/ds/MAX5075.pdf
 
Thanks

In the first circuit why we are using so many transistors.Can we not simplify it using only 2N3055?

Also is it a tested circuit?
 

for driving power transistor need more base current (Ib) which SG3524 can't give. that's y they used darlington configuration. u can modify the circuit in different maner and try.
And also I suggest u to try with MOSFET. that'll b better.

- - - Updated - - -

manishanand14 said:
Hello Everyone!

What is the minimum frequency possible in SG3524 IC.

Is is possible to make 50/60 Hz low power inverter using any easily available IC.[without programming]
Click to expand...

menic230_5.png
http://danyk.cz/menic230_5.html

ref thread: https://www.edaboard.com/threads/286357/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top