Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design dual band microstrip antenna in CST microwave Studio

Status
Not open for further replies.
K

khilji3774

Junior Member level 3
Junior Member level 3
Joined
Mar 4, 2013
Messages
25
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Famagusta, Cyprus, Cyprus
Activity points
1,463
Hi....
anyone who can help me how to design a dual band microstrp patch antenna. what are the necesarry steps which i should do. what formulas should be considered and the dimensions calculation.
 

Hi,
It should be in 2x array form. First, i think you should design the antennas individually according to your desired frequency and then combine them both using a power divider.
You can refer to Balanis book or any other microstrip patch antenna books for further research on microstrip patches and on how to design them.
Maybe these links could help you

http://www4.ncsu.edu/~trharris/files/text/Harris-740PatchProj.pdf
http://www.ijecse.org/wp-content/uploads/2012/08/Volume-1Number-2PP-230-238.pdf

All the best
 

Positron89 thank you so much i will surely check these documents, but i want to acheive this dual band with the help of slots in the patch? do u have any information about this?
 

Hi,
Previously I managed to get dual frequency on a single patch by experimenting with random slots on the patch itself. I could share some links where the researcher actually manage to achieve dual frequencies using multiple slots.

https://www.jpier.org/PIER/pier120/29.11090202.pdf
"Elliptical Shaped Antenna With Parasitic Superstrate" -IEEE Paper
"The Effects of Parasitic Superstrate Elliptical Shaped Antenna without Dots Element" -IEEE Paper

All the best
 

Thank you so much....
I also tried some random slots but is there any formula through which we make slots of some specific dimension to get the desired resonant frequencies?
 
  • Like
Reactions: shaid

    S

    shaid

    Points: 2
    Helpful Answer Positive Rating
Hi,
I'm not sure of whether there are any particular formulas for slots designing. Slots such as v-slot and etc probably has specific formula especially in terms of bandwidth enhancements for the patch. For resonant frequencies, as far as I know we usually go for the size of the patch. What are the resonant frequencies are you going for ?
 
  • Like
Reactions: shaid

    S

    shaid

    Points: 2
    Helpful Answer Positive Rating
I see..
If slots are the only option for your design, I suggest that you could post a new thread on the topic regarding on dual frequencies slots for the antenna. It may get more responses.

All the best
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top