Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What ANTENNA do you recommend???

Status
Not open for further replies.
N

nguyenthanh245

Junior Member level 1
Junior Member level 1
Joined
Mar 19, 2011
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,363
I want to design an simple antenna at 16 GHz on PCB (x-y plane). I want it to be directional in the 0z
Thank you!
 

Your requirement is really too general. There could be additional constraints that you need to look at gain, bandwidth, return loss, polarization, ... ?

But to start you off, I suggest you take a look at patch antennas. They should be simple enough to realise and also directional.

https://www.emtalk.com/tut_1.htm
 
thank you for your reply .
I am sorry about my big negligence.
Actually " I want to design an simple antenna at 16 GHz on PCB (x-y plane). I want it to be directional in the 0y", not in the 0z :(
At the beginning, i use tapered slot antenna but it is not simple enough.
I hope you could recommend me another antenna, so that i could combine it with my old antenna .
Thank you very much!
 

I cannot think of any planar/PCB type antennas which might have radiation directed in the plane containing them.

Your best bet might be to go with the slot antennas (like a vivaldi antenna, .hfss model attached). These are generally like slotted waveguide antennas and not strictly planar.

lG08c3b.png

gJMQT0l.png
 

Attachments

  • vivaldi.zip
    44.3 KB · Views: 285
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top