Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

4047 monoshot(1ms pulse width)

Status
Not open for further replies.
vinodquilon

vinodquilon

Full Member level 3
Full Member level 3
Joined
Oct 24, 2009
Messages
158
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
2,558
I have designed oneshot for 1ms Pulse width using 4047.

R5- makes output current >= 10mA to ensure load regulation.
C4- prevents bouncing of trigger switch.
1N4002- prevents discharging of c1 through LM317T.

1. Is it possible to see the 1ms 'short time' switching between RED & GREEN LEDs at output of 4047 ?

2. Can I use C4 in parallel with C1 as both have different roles in the circuit ?

3. 10K or 100K which one is better to pull down trigger switch to GND ?
 

Attachments

  • 4047monoshot(1ms).png
    4047monoshot(1ms).png
    5.5 KB · Views: 161

ouput drive with debouncer

Here is another arrangement with output drive and debouncer.
 

Attachments

  • 4047_324.png
    4047_324.png
    6 KB · Views: 165
Last edited:

Re: ouput drive with debouncer

For your concerns:
1. Good visual starts reasonably from 0.5secs for the RED and/or GRN LEDs
2. Yes, you can parallel the capacitors.
3. I will suggest 10K for faster-pull up although this selection will impact a battery operation.
Hope this helps.:-D
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top