Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is the relation between dB AND dBm

Status
Not open for further replies.
R

ravisankar

Member level 1
Member level 1
Joined
Jan 2, 2008
Messages
35
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,510
HELLO,ALL

WHAT IS THE RELATION BETWEEN dB AND dBm,GIVE THE RELATION EQUATION.


THANKYOU,ALL.
 

what is the relation between db and dbm

0dB=30dBm
Power in dB=10log(power in watt)
Power in dBm=10log(Power in milliwatt).
 
  • Like
Reactions: ygm2000

    R

    ravisankar

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating
    Y

    ygm2000

    Points: 2
    Helpful Answer Positive Rating
relation between dbm and db

balaguru thavamani said:
0dB=30dBm
Power in dB=10log(power in watt)
Power in dBm=10log(Power in milliwatt).
Click to expand...

Dear friend,
dB has no units ..
I think you should read that stuff too ..

Regards,
IanP

BTW:
30dBm = 0dBW
 
relation between dbc & dbm

Hi...

I agree with IanP. dB is dimensionless. The different is that dB is 10 log(value/value) and dBm is 10 log (value/1miliwatt). I think it's clear enough.

CMIIW
 

relationship betwen db and dbm

yes friends dB has no unit.
Sorry I've expressed in wrong manner.

But 0dBW=30dBm not 1dBW=30dBm
 

relation between power dbm

XdBm = XdBW + 30

you just add 30 :)

......

x = 10log10(P)

P = 10(x / 10)

where P is the power and x is the dBm

dBm is just the power referenced to one milliwatt (mW)
 

calculation between db and dbm

IF U SUBTRACT DBM WITH DBM the answer is in DB.
 

relaltion db and dbm

DBM does not exist.....it is dBm....also
it is not DBm nore dbm nore dbM....

it is dBm
 

add db and dbm values

Hello All,



dB or not dB?
Everything you ever wanted to know
about decibels but were afraid to ask…

True or false: 30 dBm + 30 dBm = 60 dBm? Why does 1% work out to be -40 dB one time but
then 0.1 dB or 0.05 dB the next time? These questions sometimes leave even experienced
engineers scratching their heads. Decibels are found everywhere, including power levels,
voltages, reflection coefficients, noise figures, field strengths and more.
What is a decibel and how should we use it in our calculations?
A. Winter
Rohde & Schwarz

This Application Note is intended as a refresher on the subject of decibels.

**broken link removed**

I hope this helps...


---manju---
 

what is 10log10

dBm= 10log10(P/1mW)
dB= 10log10(p/1W)
 

dbm addition subtract

First of all there are a series of mistakes in the various posts above so be careful with all of the comments (this one too).

dB is a relative measurement and dBm is a specific value referenced to milliwatts so therre is no equation to relate the two terms. One often sees a variety of letters after dB indication various reference values.

Again, beware of the comments in this thread. Much of it is in error and will just add to the confusion.
 
Re: dbm addition subtract

Azulykit said:
First of all there are a series of mistakes in the various posts above so be careful with all of the comments (this one too).

dB is a relative measurement and dBm is a specific value referenced to milliwatts so therre is no equation to relate the two terms. One often sees a variety of letters after dB indication various reference values.

Again, beware of the comments in this thread. Much of it is in error and will just add to the confusion.
Click to expand...

I agree with Azulykit; this thread is full of errors.

The dB is unitless, like saying some thing is twice (or 2x) as large as something else. Absolute numbers in logarithmic format are expressed as dB[x], where [x] is an abbreviation for the reference. For instance, dBm is a power level referenced to 1 mW. Mathmatically, 10*log10(P/1mW).

Threre's a great reference on the decibel, dB, dBm, etc. on this site:
https://www.bitweenie.com/listings/the-decibel/

That link also mentions when to use 20*log10 or 10*log10, which is a source of confusion sometimes.
 
  • Like
Reactions: js

    js

    js

    Points: 2
    Helpful Answer Positive Rating
Re: dbm addition subtract

in simple words

dB value can be taken as signal to noise ratio (Better the signal as compared to noise, more the dB value)
and
dBm is power output. (actual power output in miliwatt or watts is known if dBm is known)
 

Re: dbm addition subtract

dB is a particularly useful unit and one of the best ways to use it is to confound your peers. The above thread is a perfect example. It continues for years ......

This book has a chapter devoted to the subject if any of you re serious about really understanding the subject:

Introduction to Airborne Radar (Aerospace & Radar Systems) [George W. Stimson]



Stimson does a fine job of taking all the confusion and some of the fun out of the subject.

Azulykit
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top