Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How To Do Rectifier Simulation in Advanced Design Simulation (ADS)?

Status
Not open for further replies.
E

ecah2011

Newbie level 4
Newbie level 4
Joined
Feb 25, 2012
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,320
I have done designing a rectifier. However I am not really clear what should I do for the simulation. What we need to observe for a rectifier. How to do the analysis.

Here is my circuit
Capture3.PNG

I hope somebody could teach me all these. Where to find, what to choose. I am interested to have a graph like this;

Capture1.PNG

But always failed to do so. Please guide me..

Thanks in advance..
 

Which diode model you are using in the simulations?

I found HSMS8202 model has wrong pin connections.
You can do a quick test by connecting all the diodes in in the opposite way.
just give a try...
 
  • Like
Reactions: Gervin

    G

    Gervin

    Points: 2
    Helpful Answer Positive Rating
What is your used a technique for designed rectifier ?
 
  • Like
Reactions: Gervin

    G

    Gervin

    Points: 2
    Helpful Answer Positive Rating
KRISz said:
What is your used a technique for designed rectifier ?
Click to expand...

u mean the rectifier type..? it is villard voltage multiplier. i copy the circuit directly from a paper but didnot get at least the approximate value for the output
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top