Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] reduction of back lobe in patch antenna array

Status
Not open for further replies.

nitish77

Newbie level 3
Newbie level 3
Joined
Dec 14, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
radiation.png Hi,iam doing a project on rectangular patch antenna array(4 elements)

operating freqeuncy=2.4ghz
substrate is FR4 dielectic constant =4.4
height=1.5mm
lamda=60mm
distance between each patch=lamda/2=30mm
T-junction power divider is being used.

simulation is done in hfss

for 2 array,gain=5.5db and directivity=9db at 2.4ghz

I need some method to reduce the back lobe.
 
Last edited:

View attachment 84473 Hi,iam doing a project on rectangular patch antenna array(4 elements)

operating freqeuncy=2.4ghz
substrate is FR4 dielectic constant =4.4
height=1.5mm
lamda=60mm
distance between each patch=lamda/2=30mm
T-junction power divider is being used.

simulation is done in hfss

for 2 array,gain=5.5db and directivity=9db at 2.4ghz

I need some method to reduce the back lobe.


Why don't you try to use a reflector?
 

which type of reflector to be used and how to implement it in hfss?
Is it a simpler method?

I do not use hfss or modeling. I prefer making and testing antennas. Try the same.

BTW, if you "work on antennas", I assume you have an idea how a reflector looks.
 

Why don't you try to use a reflector?

Reflector? The patch antenna does have some back side metalization anyway, so that's more or less the reflector. Maybe the back side metalization is too small.
 

I do not use hfss or modeling. I prefer making and testing antennas. Try the same.

BTW, if you "work on antennas", I assume you have an idea how a reflector looks.

what type of feed are u using? Ensure that the feed is impedance matched
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top