Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] sim900 and pic16f886 (response problem)

Status
Not open for further replies.
B

baykoyu

Newbie level 3
Newbie level 3
Joined
Aug 16, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
Hi all,
i've a problem :S
My code;


Code: 
    unsigned char buff[6];

        seri_yaz("ATD05545555555\r");

  if(RCIF)
{
       for(i=0;i<6;i++)
{
       buff[i]=seri_al();
}
RCIF=0;
}


  if((buff[2]=='O')&&(buff[3]=='K'))
{
      RA0=1;  // Led is here 
      DelayMs(500);
      RA0=0;
}


i make a voice call with this code but i can't not control response , RA0 pin is not set. :-(
 
Last edited by a moderator:

try like this
Code: 
void interrupt()
{
if(RCIF)
{
RCIF=0;
r=seri_al();
if(r=='o')
{
p=1;
}
if(r=='k')
{
q=1;
}
if(p==1&&q==1)
{
RA0=1; // Led is here 
DelayMs(500);
RA0=0;
}
}
}

- - - Updated - - -

also pic porta is analog set it as digital using adcon1 register
 
@zia thanks problem is solved :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top