Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

800 V MOSFET for Flyback SMS: suggestions?

Status
Not open for further replies.

edaenrico

Member level 4
Member level 4
Joined
Apr 19, 2010
Messages
76
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
1,864
Hi,

I'm designing a 30 Watt Flyback converter.

I'm gonna use a low Rds, 800 V Mosfet.

Are there any suggestions?

Thanks in advance,
Enrico Migliore
 

How low of an Rds on do you think you need? To get much below 1 ohm, you're looking at expensive technology, like SiC. For such high voltages, conduction losses probably won't even dominate, so you might look at fast IGBTs as well. Or just using a different topology that requires less voltage handling.
 

Hi,

I'm designing a 30 Watt Flyback converter.

I'm gonna use a low Rds, 800 V Mosfet.

Are there any suggestions?

Thanks in advance,
Enrico Migliore
Hi Enrico
Try 2sk2611 !
Best Wishes + Merry Christmas
Goldsmith
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top