Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help solving power network

Status
Not open for further replies.
T

tryipod

Newbie level 3
Newbie level 3
Joined
Apr 30, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,306
Need help solving power network (power flow analysis)

I need help on solving this problem. I spent hours, but can't find it. Thanks in advance

1.jpg

The source voltages and impedances in the network below are in per-unit.
(a) Sketch the admittance diagram of the system and indicate all appropriate values on the diagram.
(b) Determine the bus admittance matrix
(c) Determine the voltages at each bus.
 
Last edited:

(a) All you have to do here is to convert the impedances to admittance and redraw the diagram, Y(admittance) = 1/Z(impedance). Ex. j0.5 = -j2
In order to solve the remainder of the problem you need to state which method of solving the network is required, (gauss seidel, newton raphson.....)
 
fadapow said:
(a) All you have to do here is to convert the impedances to admittance and redraw the diagram, Y(admittance) = 1/Z(impedance). Ex. j0.5 = -j2
In order to solve the remainder of the problem you need to state which method of solving the network is required, (gauss seidel, newton raphson.....)
Click to expand...

Thanks and yes, I figured out the first one. but the voltage part on left and right side, what should I do on the diagram?

- - - Updated - - -

fadapow said:
(a) All you have to do here is to convert the impedances to admittance and redraw the diagram, Y(admittance) = 1/Z(impedance). Ex. j0.5 = -j2
In order to solve the remainder of the problem you need to state which method of solving the network is required, (gauss seidel, newton raphson.....)
Click to expand...

Thanks and yes, I figured out the first one. but the voltage part on left and right side, what should I do on the diagram?
I was solving it with Y11=y10+y12_y13....
to find out bus admittance matrix.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top