Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[DRC] Fanout & Capacitance Constraints - why both are needed?

Status
Not open for further replies.

ivlsi

Advanced Member level 3
Advanced Member level 3
Joined
Feb 17, 2012
Messages
883
Helped
17
Reputation
32
Reaction score
16
Trophy points
1,298
Activity points
6,868
Hi All,

As for DRC, why both Fanout & Capacitance Constraints are needed? Isn't enough have just one of them?

Thank you!
 

Capacitance is required to respect liberty timing.
Fanout is not mandatory to be respected as timing but it could be needed as company rule, like tie cell.
 
  • Like
Reactions: ivlsi

    ivlsi

    Points: 2
    Helpful Answer Positive Rating
sure rca! the max fanout also make a limit for the current driven into output stage of the driving cell (IMHO)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top