Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is a power line noise?

Status
Not open for further replies.
S

snishanth512

Full Member level 3
Full Member level 3
Joined
Nov 12, 2012
Messages
159
Helped
13
Reputation
26
Reaction score
13
Trophy points
1,308
Location
India
Activity points
2,135
What is a power line ?

Will there be a power line noise in DC power supply used in labs?

How to remove it ?

Is notch filter enough?

How to design notch filter?

Explain with diagrams.

- - - Updated - - -

sorry, its "What is a power line noise?"
 

Re: how to remove power line noise ?

you can add large capacitor in parallel with the supply voltage , the noise in the supply voltage can come from the supply itself like during converting from A.C to D.C. The noise can also couple from the circuit to the supply in case of the digital circuit switching operation, therfore it is recommended to set up the ground of the analog from that of the digital
 
Re: how to remove power line noise ?

The source of the noises are diverse with out knowing if we cannot rightly point to the solution, But if it is a AC ripple then the capacitor can smoothen it out for you
 

Re: how to remove power line noise ?

Junus2012 said:
you can add large capacitor in parallel with the supply voltage , the noise in the supply voltage can come from the supply itself like during converting from A.C to D.C. The noise can also couple from the circuit to the supply in case of the digital circuit switching operation, therfore it is recommended to septet the ground of the analog from that of the digital
Click to expand...

if there is only 1 power supply, how can you seperate ground of analog and digital?
 

Re: how to remove power line noise ?

A good lab supply will have negligible power line noise in its output.
 

If the power line noise is a pure sinewave then a notch filter will remove it. But it has harmonics that a notch filter will not remove.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top