Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation and result of EBG structure in CST. Please help me !

Status
Not open for further replies.
V

votientu

Member level 2
Member level 2
Joined
Oct 27, 2012
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,647
Hey guys, do you familliar with EBG in CST.

I tried to simulate it, but I don't know how to show the result,
actually, what is the cut frequence I have in my model (I posted it here) ?

I refer the example in the one of good book about EBG (posted here), I refer its
parameters in my simulation. It should be its result in my result.
Please refer chapter 4, in section 4.1 of Electromagnetic Band Gap Structures in Antenna Engineering (Cambridge Edition).

Anyway, please guys, could you help me ?
Thank guys!
 

Attachments

  • EBG.rar
    154.5 KB · Views: 226
Last edited:

R u from VN? ? (Nhìn tên user và ký hiệu biến trong CST nên mình đoán vậy?)
Dimension of your EBG is 8x8 cell. U simulate it with 1 unit (1x8 cell).
U can see this picture to set port for your EBG and simulate it.
 

Attachments

  • htvt1.jpg
    htvt1.jpg
    33.7 KB · Views: 153
  • htvt2.jpg
    htvt2.jpg
    34.8 KB · Views: 146
  • Like
Reactions: Naisha

    N

    Naisha

    Points: 2
    Helpful Answer Positive Rating
Thank you, are you in Hanoi, i'm student of HUT.
I love this EBG now :).
 

votientu said:
Thank you, are you in Hanoi, i'm student of HUT.
I love this EBG now :).
Click to expand...
I'm member of RF-Lab. And I'm sure u too :)).
Nói 1 hồi hóa ra cùng lab và cùng đội làm anten
 
Last edited:

I'm very confused of setting port and boundary condition. I followed your instruction but it gave me "Some higher propagation modes at port 1 are not considered ..." .
I tried to change port size and to set "open and add space" in boundary condition. Could you help me one more time ?
Anyway, are you free tommorow afternoon, 5pm at RF lab ok ?
 

Attachments

  • Thu nghiem EBG 2.rar
    12.1 KB · Views: 166

votientu said:
I'm very confused of setting port and boundary condition. I followed your instruction but it gave me "Some higher propagation modes at port 1 are not considered ..." .
I tried to change port size and to set "open and add space" in boundary condition. Could you help me one more time ?
Anyway, are you free tommorow afternoon, 5pm at RF lab ok ?
Click to expand...
I'm busy today. My email is: leesixan@gmail.com. I will see "Thu nghiem EBG 2.rar" tomorrow. Sorry :(
 

votientu said:
I'm very confused of setting port and boundary condition. I followed your instruction but it gave me "Some higher propagation modes at port 1 are not considered ..." .
I tried to change port size and to set "open and add space" in boundary condition. Could you help me one more time ?
Anyway, are you free tommorow afternoon, 5pm at RF lab ok ?
Click to expand...
I'm busy today. My email is: leesixan@gmail.com. I will see "Thu nghiem EBG 2.rar" tomorrow. Sorry :(
 

Hi votientu,

I'm just getting start with EBG designs in CST (previously I've been using HFSS).

Can you please provide some instructions on how to analyze the file you've attached in your first post here, e.g. excitation, solver modes, etc...

Appreciating your support.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top