Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to reduce the Quasi yagi antenna and the printed dipole Antenna's beamwidth

Status
Not open for further replies.
L

liujiandy

Newbie level 2
Newbie level 2
Joined
Oct 21, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
hi all:
I designed a Quasi-Yagi antenna and a printed dipole element,but the beamwidth is wider than 150,and I wonder how can reduce the beamwidth under 100. Does anyone knows which paremeter influence the beamwidth.Thanks
 

In Yagi-Uda antennas, the gain and beam width are functions of antenna length.

The beam width of 150 degrees is quite poor; it is similar to a bare dipole. You can add a flat reflector or a corner reflector to reduce is below 100 degrees.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top