Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] power MOS gate driver

Status
Not open for further replies.
F

faze2007

Newbie level 3
Newbie level 3
Joined
Oct 5, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
Hi
I am designing a 100w unipolar spwm(20kHz) inverter(H-Bridge), The dc link voltage will be 12 volts.
does anyone can help me what kind of (mosfet) and (gate driver) and also (optocoupler) should i use?
please give me device's code if it's possible.


Thanks for your help,
Farzam
 

Hi Farzam
You can easily use four IRFZ44 and an IR2110 as your driver . and if you need opto coupler ( i think you won't need ) i think 6n136 and 6n137 would be ok .
Best Wishes
Goldsmith
 
thanks a lot Goldsmith, u did me a big favor
I have another problem
I couldn't find IR2110 and 6n136 in proteus program for simulation, what can i do?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top