Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] need clarification about adxl335

Status
Not open for further replies.
D

dxtr

Member level 3
Member level 3
Joined
Apr 27, 2012
Messages
66
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,699
hey everyone , i have an accelerometer adxl335 , i'm trying to figure out how it works
i put it in the table 'not moving' and its gives me :
Xout = 1.447v
Yout = 1.525v
Zout = 1.803v
i still remember a little about physics and i know if an object is not moving it acceleration is 0 m/s² ( a = dv/dt )
then why it gives me those values ? shouldn't give me 0v at the output ?
i need some clarification please :)
 

If the sensor is in zero acceleration position, it produces about 1.5 V,
so Xout = 1.447v and Yout = 1.525v are OK.

> <i>i know if an object is not moving it acceleration is 0 m/s²</i>

It is true concerning horizontal axis,
but vertical axis sensor is affected by gravity, i.e. 1g.
Sensitivity is 300mV/g, therefore 1g gives additional 300 mV.
You have 1.803v, it is absolutely normal.
 
dxtr said:
i still remember a little about physics ...
Click to expand...

Apparently the emphasis should be on "little".

Due to the fact the following statement is simply not correct.

dxtr said:
... i know if an object is not moving it acceleration is 0 m/s² ( a = dv/dt )
Click to expand...

The are numerous cases when an object has 0 m/s velocity (not moving) and still under acceleration (≠ 0 m/s²).

A simple analogy:

You toss a ball perfectly straight up into the air.

At some point the ball with come to a complete stop (0 m/s velocity), motionless for a finite period of time, before beginning to fall/move back towards you.

During the balls entire flight it is accelerating due to gravity, approximately 9.8 m/s² towards the earth.

It is in fact this gravitational acceleration which brings the ball to a momentary stop, motionless, during its flight.



BigDog
 
  • Like
Reactions: dxtr

    D

    dxtr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top